RADIAL
DRILLING RAPID MACHINE RB
32
| |
| (click photo to enlarge it) |
| TECHNICAL DATA |
|
RB 32 |
|
| Drilling capacity in mild steel |
mm |
32 |
| Drilling capacity in cast iron GG 20 |
mm |
40 |
| Tapping in mild steel / GG 20 |
- |
M20 / M30 |
| Number of spindle speeds |
- |
12 |
| Spindle speed range |
min-1 |
80...2800 |
| Spindle nose taper |
- |
MK 4 |
| Quill travel |
mm |
170 |
| Column travel |
mm |
375 |
| Column diameter |
mm |
160 |
| Distance between spindle and column axes,
min / max |
mm |
300 / 710 |
| Spindle feed rate |
mm/rev |
0,1; 0,15; 0,25 |
| Working table |
mm |
620 x 890 |
| Additional base |
mm |
630 x 1100 |
| Tilting table |
mm |
500 x 600 |
| Cube table |
mm |
360 x 400 x 500 |
| T-slots -number x width x distance |
|
|
| working table and additional base |
mm |
4 x 18 x 125 |
| tilting table and additional table |
mm |
3 x 18 x 100 |
| Max. distance from the spindle nose to : |
|
|
| working table, min / max |
mm |
220 / 595 |
| additional base, min / max |
mm |
925 / 1300 |
| tilting table, min / max |
mm |
195 / 570 |
| Main motor power |
kW |
1,1 / 1,5 |
| Required air pressure |
MPa |
0,5 - 0,6 |
| Weight : |
|
|
| machine without options |
kg |
990 |
| additional base |
kg |
200 |
| tilting table |
kg |
115 |
| cube table |
kg |
110 |
| STANDARD FEATURES |
ACCESSORIES |
OPTIONS |
| |
 Centralized
elecrtropneumatic interlock of the Drilling Head in the specified
working position |
|
Chuck
P16 |
|
Additional
base |
|
| |
Centralized lubrication system |
|
Machine
Vice |
|
Tilting
table |
|
| |
Safety
clutch for the feed drive |
|
Sleeve
adapter MK4 / MK3 |
|
Additional
table |
|
| |
Tapping
device |
|
|
|
Cooling
system |
|
| |
Working
lighting
|
|
|
|
Working
area protection |
|
| |
Holder
for drill chuck arbour MK4/B18 |
|
|
|
|
|
| |
Wedge
for tool knock-out |
|
|
|
|
|
|
